The complete equipment of gypsum powder production line includes DCS electric control system, dust removal system, pipeline heating system, rolling mill system, conveying system, raw material crusher, boiling calciner, etc.

　　石膏粉生產線DCS系統是目前先進的控制系統。其主要優點是:可靠性高、危險性分散、易膨脹、控制功能強、配置靈活、操作管理集中、人機界面友好。廣泛應用于石油化工、電力、建材等行業。

　　The DCS system of gypsum powder production line is an advanced control system at present. Its main advantages are: high reliability, dispersed risk, easy expansion, strong control function, flexible configuration, centralized operation and management, friendly man-machine interface. It is widely used in petrochemical, electric power, building materials and other industries.

　　石膏粉生產線原料破碎工藝:石膏塊體次由粗顎式破碎機破碎，分布在卸料區，第二次由細顎式破碎機破碎，送入料倉。在此過程中，嚴禁粗顎式破碎機帶負荷起動，停止報警信號;卸料區分為兩個卸料區，卸料車應自由切換，物料分布均勻。石膏粉生產線預磨:筒倉中的石膏粉用螺桿量取，帶機進入柱磨機進行進一步磨粉，再用分離器進行分離。合格物料由角螺桿輸送機、立斗提升機、頂螺桿輸送機運至面粉倉。在此過程中，用定值法測量螺旋，計算累計輸出。柱磨機也不能帶負荷啟動，并需要測試電流;由庫存水平信號來選擇倉庫進料。

　　Crushing process of raw material in gypsum powder production line: gypsum block is crushed by coarse jaw crusher for the first time, distributed in the discharge area, and broken by fine jaw crusher for the second time, and sent to the silo. In this process, it is strictly forbidden to start with load and stop alarm signal of rough jaw crusher; unloading area is divided into two unloading areas, unloading truck should switch freely and material distribution is even. Pre-grinding of gypsum powder production line: The gypsum powder in silo is measured by screw, and is further grinded by a column mill with a belt conveyor, then separated by a separator. Qualified materials are transported from angle screw conveyor, bucket hoist and top screw conveyor to flour bin. In this process, the helix is measured by the fixed value method and the cumulative output is calculated. The column mill can not start with load, and needs to test the current; the stock level signal is used to select the warehouse feed.

　　石膏粉生產線設備主要是石膏粉沸騰爐。石膏粉沸騰爐是利用流化技術煅燒石膏的專用設備。其加熱介質為煙或?qū)嵊汀Ａ骰布訜釥t特點:

　　The equipment of gypsum powder production line is mainly gypsum powder boiling furnace. Gypsum powder boiling furnace is a special equipment for calcining gypsum by fluidization technology. The heating medium is smoke or heat conducting oil. Characteristics of Fluidized Bed Heating Furnace:

　　1)體積小，生產能力大。

　　1) Small size and large production capacity.

　　2)結構簡單，不易損壞。

　　2) It has simple structure and is not easy to be damaged.

　　3)設備緊湊，占地面積小。

　　3) Compact equipment and small area.

　　4)低能耗。

　　4) Low energy consumption.

　　5)操作和控制方便。

　　5) Easy to operate and control.

　　6)節省基建投資，降低運營成本。

　　6) Save capital investment and reduce operating costs.